Beginner's Guide to Podcast Creation
Ever since Apple’s release of iTunes 4.9 with built-in support for podcasting, hundreds of thousands of people have discovered the wide range of free audio programs now available as podcasts. While most will be content only to listen to podcasts, some - perhaps including you - may be ready to create their own radio-style programs. After all, distribution through iTunes is now easy, and subscriptions are the only thing separating listeners from your thoughts and ideas.
Creating podcasts isn’t simple, but it’s not too hard, either. You’ll need a small combination of hardware and software in order to create your own recordings, and in this iPod 101 tutorial Beginner’s Guide to Podcast Creation, we’ll walk through the different elements you need to create a simple podcast, from computer and microphone through to the finished product.
First Things First:
The Plan
Amazingly enough, this first step is the one many podcasters skip: develop a plan. Before you start recording, think about what you want to say, and organize your show accordingly. Make notes, prepare your interviews (if any), and try to improvise as little as possible. While a completely spontaneous show can sound good if you’ve got the knack, the best podcasters prepare their shows in advance and work hard to provide interesting content. (See Seven Rules of Effective Podcasting (offsite link) for some tips on creating good podcasts that people will come back to listen to.) There are thousands of podcasts available today, but it’s easy to pass most of them up because they don’t stand out - figure out your angle, and run with it!
Next Up:
The Gear
You won’t need much hardware to record a podcast: typically, you’ll start with a Mac or PC computer with a recent version of either Windows or Mac OS X; Windows XP or Mac OS X 10.3 or later are recommended. (You can also use Linux, but we’ll only look at Mac and Windows software in this article.) The only other hardware you’ll need is a microphone.
The microphone is the most important element in the recording chain, other than your voice - the way listeners hear your voice is greatly affected by the quality of your mic. Don’t use an internal microphone in a computer, such as you’ll find on laptops and some desktop computers. These mics will pick up ambient sounds, such as the noise of the computer, as well as anything you move on your desk while recording. Don’t use a cheap mic that may have come with your computer either. These mics are generally very low-quality and are designed for voice chats, not recording.
You don’t need to spend a lot for a mic, however; many podcasters use USB headsets that are designed for both voice chats and recording. Logitech has an excellent line of USB headsets that range up to $50 in price, each with noise-cancelling microphones, which help filter out the ambient noise in your room or outside the windows.
If you prefer not to use a USB headset, you’ll just need a microphone and a way to make sure your PC or Mac can record from it. Most PCs have sound cards that are capable of recording audio through a microphone-in port (often colored pink), but some PCs and many Macs don’t have such a port. Griffin Technology’s $40 iMic solves this problem with a small silver disc that connects to your USB port and adds recording functionality. An inexpensive microphone add-on from Griffin called the Lapel Mic ($15) can then be used as a collar-mounted stereo microphone.
If you want to sound more professional, you’ll want to look for a condenser microphone, which will require an external power source (you don’t simply plug it into your computer) and result in more realistic sound. Behringer’s Studio Condenser Microphone C-1, at about $55, is a good starting point. You can spend hundreds of dollars for a professional mic, but only real pros need to go into that price range.
We used a simple, inexpensive solution to create our own first two podcasts: Griffin’s iTalk ($39.99, iLounge rating: A-). Because we wanted to create the first podcast actually made with an iPod, iTalk was the best microphone option we could find. Belkin and DLO also make a few alternative products, which we review here for those interested in duplicating our efforts.
Recording Software
Recording your own voice is relatively simple, and there are a variety of PC and Mac programs that can do this. One of the most popular programs among podcasters is Audacity, which can record, edit and post-process your audio. It has several advantages: it is multi-platform (Windows 98 and later, Mac OS 9 and X, and Linux), and it’s free. This open-source program has become the standard tool for podcasters who want to record their shows, edit their recordings, and combine other recordings (such as intros, jingles or music, sometimes made with other programs) to create finished shows.
Everything you record with Audacity appears on screen as sound waves that you can edit very much like a word processing program: as with a page full of words, you can zoom in and out to see more or less of the audio wave on screen at once, select portions with a cursor, and delete or format those portions as you desire. Many podcasters delete their “ums” and “you knows” wherever they appear, and you can also use the cursor to snip out boring or screwed-up parts of your recording. Audacity also has tools that reduce background noise and static, create echo effects, and increase or decrease the amplitude of your voice. After each recording, save your file in WAV (uncompressed) format - it’ll take up a bit of space on your hard drive, but it’s the best format to guarantee you don’t compromise on sound quality until you’re ready.
Audacity has one major limitation for podcasters: while you can use Audacity to record yourself, you cannot use it to easily record interviews with people who aren’t in the same room; Audacity only records directly from an input source such as a microphone. Many podcasters use the free teleconferencing program Skype to conduct their interviews of other people, and recording the interviews requires an additional piece of software. Podcasters use the Windows program Virtual Audio Cable or the Mac program Audio Hijack Pro. Either of these programs traps Skype’s audio and saves it so that you can edit it in Audacity.
After you’ve completed editing of your recordings and interviews, you can export your finished podcast in several formats, including MP3, AIFF and WAV. If you want to export your podcast as an MP3 file, you’ll need to download the LAME MP3 encoder as a helper for Audacity. But if you use AIFF or WAV, iTunes can handle the MP3 compression for you; this latter option is probably best, because you’ll have more flexibility in how you compress the file. We use iTunes for compression, as discussed below.
Converting Your Podcast
Once you have everything recorded, it’s time to get your podcast into a form that’s easy to share. A one-hour WAV file will take up about 600 MB; listeners won’t download such large files, so you’ll need to compress it into either MP3 or AAC format. As you already know, iTunes has the ability to turn your CDs into MP3s - now you’ll use the same feature to convert your podcast.
The first step is add your WAV file to your iTunes library. Drag it from your desktop to the library window, or drag it to a playlist. (One good way to work on files like this is to create a temporary “Temp” playlist, into which you drag files you don’t plan to keep.) Before converting your podcast, you should tag (identify details for) the file. You can enter a name, artist, album, and comments. Use these tags, because once listeners get a hold of your podcast, this is the only way they’ll have to identify it. Start by giving your podcast a name that is not too long; enter your name as artist (or your website’s URL), and, in the Comments field, add anything that you’d like listeners to be able to know. Also, use any of the other fields you want, such as Year, Genre, etc., to provide enough info about your podcast. If you have a logo or photo, you can add it as “album art” in the Artwork tab.
Then it’s time to choose your compression settings. Open the iTunes preferences (iTunes > Preferences on Mac OS X; Edit > Preferences on Windows), then click the Importing tab. The Import Using menu lets you select the format you convert your file to. You’ll want to choose either AAC or MP3. AAC will only play through iTunes and on iPods; while some other software may support AAC, few other portable music players do, so your best choice is MP3. (If you do choose AAC, you can select Podcast from the settings menu to use a preset podcast bit rate setting.)
Select MP3 from the Import Using menu, then select Custom from the Setting menu. Choose a bit rate of 64 kbps; you could go lower or higher, but voice sounds good at that bit rate, and your files won’t be too large. From the Sample Rate menu, select 22.050 kHz; this is high enough for voice. From the Channels menu, select Mono, unless your podcast is mostly music; voice does not need stereo, and this keeps your files small. Click OK.
Now, find your raw podcast file in your library or playlist, select it, then select Advanced > Convert Selection to [format], where format is AAC or MP3. iTunes will compress your file using your settings, and the resulting file will appear in your library. If you’ve tagged your file before converting it, you’ll find it in the genre you set, or by its title. You can now right-click (Windows) or Control-click (Mac) the file, select Show Song File, and a window will open showing the converted file.
Publishing your Podcast
If you’ve gotten to this stage, you might already know you have to set up a podcast “feed” URL on your website. (If not, this article tells you all about podcasts and RSS feeds. The basic idea is that you need to have a place where your podcast is stored for people to download it, and then create a web link that other people can use to find the file.) Once you have the feed URL, load iTunes, go to the iTunes Music Store, click the Podcasts link in the left-hand column, and look for the Publish a Podcast link on the left of the Podcasts page. Click that link, enter the URL for your podcast, then click Continue.
But at this point, there’s a snag. You’ll have to sign in to your iTunes Music Store account. While you can browse, subscribe to and download podcasts without an iTunes Music Store account, you cannot submit any unless you have an account in the store you want to add them to. So, for example, someone in Australia who wants to add a podcast to the US iTunes Music Store will not be able to do so unless they have a US credit card and billing address.
If you do have an iTunes Music Store account, the rest is simple: iTunes automatically picks up any comments and descriptions you’ve added to your RSS feed; you cannot edit them once the podcast is added to iTunes. To find out about the tags you can use, click the “Learn more about podcasting on iTunes” link when you are on the Publish podcasts to the Music Store page. This will take you to a page with a FAQ, and a downloadable PDF file containing full specifications.
Apple also has a tutorial about creating podcasts using GarageBand, which is part of iLife ‘05. While GarageBand has some limits for creating podcasts - recordings are limited in time, for example - it is a good way for beginners to work with mixing and editing shows.
Links to Additional iLounge Information on Podcasting
Need to know more? Take a look at our past articles on podcasting, and join our Podcasting discussion forum to share experiences and advice with other people. Of course, your comments are always welcome below, as well.
Understanding the Podcasting Revolution
Complete Guide to iTunes’ Podcasts
iLounge Podcasting Discussion Forum
Complete Archive of iLounge Podcast Stories
http://www.ilounge.com/index.php/articles/comments/beginners-guide-to-podcast-creation/
Ever since Apple’s release of iTunes 4.9 with built-in support for podcasting, hundreds of thousands of people have discovered the wide range of free audio programs now available as podcasts. While most will be content only to listen to podcasts, some - perhaps including you - may be ready to create their own radio-style programs. After all, distribution through iTunes is now easy, and subscriptions are the only thing separating listeners from your thoughts and ideas.
Creating podcasts isn’t simple, but it’s not too hard, either. You’ll need a small combination of hardware and software in order to create your own recordings, and in this iPod 101 tutorial Beginner’s Guide to Podcast Creation, we’ll walk through the different elements you need to create a simple podcast, from computer and microphone through to the finished product.
First Things First:
The Plan
Amazingly enough, this first step is the one many podcasters skip: develop a plan. Before you start recording, think about what you want to say, and organize your show accordingly. Make notes, prepare your interviews (if any), and try to improvise as little as possible. While a completely spontaneous show can sound good if you’ve got the knack, the best podcasters prepare their shows in advance and work hard to provide interesting content. (See Seven Rules of Effective Podcasting (offsite link) for some tips on creating good podcasts that people will come back to listen to.) There are thousands of podcasts available today, but it’s easy to pass most of them up because they don’t stand out - figure out your angle, and run with it!
Next Up:
The Gear
You won’t need much hardware to record a podcast: typically, you’ll start with a Mac or PC computer with a recent version of either Windows or Mac OS X; Windows XP or Mac OS X 10.3 or later are recommended. (You can also use Linux, but we’ll only look at Mac and Windows software in this article.) The only other hardware you’ll need is a microphone.
The microphone is the most important element in the recording chain, other than your voice - the way listeners hear your voice is greatly affected by the quality of your mic. Don’t use an internal microphone in a computer, such as you’ll find on laptops and some desktop computers. These mics will pick up ambient sounds, such as the noise of the computer, as well as anything you move on your desk while recording. Don’t use a cheap mic that may have come with your computer either. These mics are generally very low-quality and are designed for voice chats, not recording.
You don’t need to spend a lot for a mic, however; many podcasters use USB headsets that are designed for both voice chats and recording. Logitech has an excellent line of USB headsets that range up to $50 in price, each with noise-cancelling microphones, which help filter out the ambient noise in your room or outside the windows.
If you prefer not to use a USB headset, you’ll just need a microphone and a way to make sure your PC or Mac can record from it. Most PCs have sound cards that are capable of recording audio through a microphone-in port (often colored pink), but some PCs and many Macs don’t have such a port. Griffin Technology’s $40 iMic solves this problem with a small silver disc that connects to your USB port and adds recording functionality. An inexpensive microphone add-on from Griffin called the Lapel Mic ($15) can then be used as a collar-mounted stereo microphone.
If you want to sound more professional, you’ll want to look for a condenser microphone, which will require an external power source (you don’t simply plug it into your computer) and result in more realistic sound. Behringer’s Studio Condenser Microphone C-1, at about $55, is a good starting point. You can spend hundreds of dollars for a professional mic, but only real pros need to go into that price range.
We used a simple, inexpensive solution to create our own first two podcasts: Griffin’s iTalk ($39.99, iLounge rating: A-). Because we wanted to create the first podcast actually made with an iPod, iTalk was the best microphone option we could find. Belkin and DLO also make a few alternative products, which we review here for those interested in duplicating our efforts.
Recording Software
Recording your own voice is relatively simple, and there are a variety of PC and Mac programs that can do this. One of the most popular programs among podcasters is Audacity, which can record, edit and post-process your audio. It has several advantages: it is multi-platform (Windows 98 and later, Mac OS 9 and X, and Linux), and it’s free. This open-source program has become the standard tool for podcasters who want to record their shows, edit their recordings, and combine other recordings (such as intros, jingles or music, sometimes made with other programs) to create finished shows.
Everything you record with Audacity appears on screen as sound waves that you can edit very much like a word processing program: as with a page full of words, you can zoom in and out to see more or less of the audio wave on screen at once, select portions with a cursor, and delete or format those portions as you desire. Many podcasters delete their “ums” and “you knows” wherever they appear, and you can also use the cursor to snip out boring or screwed-up parts of your recording. Audacity also has tools that reduce background noise and static, create echo effects, and increase or decrease the amplitude of your voice. After each recording, save your file in WAV (uncompressed) format - it’ll take up a bit of space on your hard drive, but it’s the best format to guarantee you don’t compromise on sound quality until you’re ready.
Audacity has one major limitation for podcasters: while you can use Audacity to record yourself, you cannot use it to easily record interviews with people who aren’t in the same room; Audacity only records directly from an input source such as a microphone. Many podcasters use the free teleconferencing program Skype to conduct their interviews of other people, and recording the interviews requires an additional piece of software. Podcasters use the Windows program Virtual Audio Cable or the Mac program Audio Hijack Pro. Either of these programs traps Skype’s audio and saves it so that you can edit it in Audacity.
After you’ve completed editing of your recordings and interviews, you can export your finished podcast in several formats, including MP3, AIFF and WAV. If you want to export your podcast as an MP3 file, you’ll need to download the LAME MP3 encoder as a helper for Audacity. But if you use AIFF or WAV, iTunes can handle the MP3 compression for you; this latter option is probably best, because you’ll have more flexibility in how you compress the file. We use iTunes for compression, as discussed below.
Converting Your Podcast
Once you have everything recorded, it’s time to get your podcast into a form that’s easy to share. A one-hour WAV file will take up about 600 MB; listeners won’t download such large files, so you’ll need to compress it into either MP3 or AAC format. As you already know, iTunes has the ability to turn your CDs into MP3s - now you’ll use the same feature to convert your podcast.
The first step is add your WAV file to your iTunes library. Drag it from your desktop to the library window, or drag it to a playlist. (One good way to work on files like this is to create a temporary “Temp” playlist, into which you drag files you don’t plan to keep.) Before converting your podcast, you should tag (identify details for) the file. You can enter a name, artist, album, and comments. Use these tags, because once listeners get a hold of your podcast, this is the only way they’ll have to identify it. Start by giving your podcast a name that is not too long; enter your name as artist (or your website’s URL), and, in the Comments field, add anything that you’d like listeners to be able to know. Also, use any of the other fields you want, such as Year, Genre, etc., to provide enough info about your podcast. If you have a logo or photo, you can add it as “album art” in the Artwork tab.
Then it’s time to choose your compression settings. Open the iTunes preferences (iTunes > Preferences on Mac OS X; Edit > Preferences on Windows), then click the Importing tab. The Import Using menu lets you select the format you convert your file to. You’ll want to choose either AAC or MP3. AAC will only play through iTunes and on iPods; while some other software may support AAC, few other portable music players do, so your best choice is MP3. (If you do choose AAC, you can select Podcast from the settings menu to use a preset podcast bit rate setting.)
Select MP3 from the Import Using menu, then select Custom from the Setting menu. Choose a bit rate of 64 kbps; you could go lower or higher, but voice sounds good at that bit rate, and your files won’t be too large. From the Sample Rate menu, select 22.050 kHz; this is high enough for voice. From the Channels menu, select Mono, unless your podcast is mostly music; voice does not need stereo, and this keeps your files small. Click OK.
Now, find your raw podcast file in your library or playlist, select it, then select Advanced > Convert Selection to [format], where format is AAC or MP3. iTunes will compress your file using your settings, and the resulting file will appear in your library. If you’ve tagged your file before converting it, you’ll find it in the genre you set, or by its title. You can now right-click (Windows) or Control-click (Mac) the file, select Show Song File, and a window will open showing the converted file.
Publishing your Podcast
If you’ve gotten to this stage, you might already know you have to set up a podcast “feed” URL on your website. (If not, this article tells you all about podcasts and RSS feeds. The basic idea is that you need to have a place where your podcast is stored for people to download it, and then create a web link that other people can use to find the file.) Once you have the feed URL, load iTunes, go to the iTunes Music Store, click the Podcasts link in the left-hand column, and look for the Publish a Podcast link on the left of the Podcasts page. Click that link, enter the URL for your podcast, then click Continue.
But at this point, there’s a snag. You’ll have to sign in to your iTunes Music Store account. While you can browse, subscribe to and download podcasts without an iTunes Music Store account, you cannot submit any unless you have an account in the store you want to add them to. So, for example, someone in Australia who wants to add a podcast to the US iTunes Music Store will not be able to do so unless they have a US credit card and billing address.
If you do have an iTunes Music Store account, the rest is simple: iTunes automatically picks up any comments and descriptions you’ve added to your RSS feed; you cannot edit them once the podcast is added to iTunes. To find out about the tags you can use, click the “Learn more about podcasting on iTunes” link when you are on the Publish podcasts to the Music Store page. This will take you to a page with a FAQ, and a downloadable PDF file containing full specifications.
Apple also has a tutorial about creating podcasts using GarageBand, which is part of iLife ‘05. While GarageBand has some limits for creating podcasts - recordings are limited in time, for example - it is a good way for beginners to work with mixing and editing shows.
Links to Additional iLounge Information on Podcasting
Need to know more? Take a look at our past articles on podcasting, and join our Podcasting discussion forum to share experiences and advice with other people. Of course, your comments are always welcome below, as well.
Understanding the Podcasting Revolution
Complete Guide to iTunes’ Podcasts
iLounge Podcasting Discussion Forum
Complete Archive of iLounge Podcast Stories
http://www.ilounge.com/index.php/articles/comments/beginners-guide-to-podcast-creation/
posted by Quantum Consciousness | 12:18 PM
0 Comments:
Post a Comment
<< Home